MAWAA-SHOP

Steam station

Name: Steam station
Brand: MAWAA-SHOP
Price: 119.0 EUR
Availability: InStock

€119,00 EUR

Sale Sold out

Tax included. Shipping calculated at checkout.

Product variants

Quantity

Safety notice:

Basic safety precautions should always be observed when using electrical appliances.

Check that the voltage specified on the rating plate matches that of your local power supply before connecting the appliance to the mains. Children aged 8 years and above, as well as persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, may only use this appliance if they are supervised or have been instructed in its safe use and understand the hazards involved.

Children must be supervised to ensure they do not play with the appliance. Unless they are older than 8 years and are supervised, children should not perform any cleaning or maintenance work.

This device is not a toy.

This device contains no user-serviceable parts. If the power cord, plug, or any other part of the device is defective, or if the device has been dropped or damaged, repairs should only be carried out by a qualified electrician.

Improper repairs can put the user at risk of damage.

Keep the device and power cord out of the reach of children.

Keep the device out of reach of children when it is switched on or cooling down.

Keep the device and power cord away from heat or sharp edges that could cause damage.

Keep the device away from other heat-emitting devices.

Keep the device free of dust, lint, hair, or anything that could reduce the device's airflow.

Do not immerse the device in water or other liquids.

Do not operate the device with wet hands.

Do not expose the device to rain.

Do not leave the device unattended while it is plugged into the mains.

Do not pull the device out of the socket by pulling on the cable; switch it off and unplug it manually.

Do not pull or carry the device by the power cord.

Do not use the device if it has been dropped or shows visible signs of damage.

Do not use the device for any purpose other than its intended use.

Do not use any parts/accessories or adapters other than those supplied with this device, as this may cause damage.

This device is intended for domestic use only and must not be used for commercial purposes.

Caution: The device emits very hot steam; extreme caution is always required during use.

Hot surface: Do not touch the hot areas or heating components of the device.

Warning: Risk of scalding.

Keep the device away from flammable materials.

Care and maintenance

Before you begin cleaning or maintenance, always unplug the iron from the wall socket and allow it to cool down sufficiently.

STEP 1: Drain any remaining water from the water tank to prevent leakage during cleaning.

STEP 2: Wipe the ceramic sole with a soft, damp cloth and dry it thoroughly.

STEP 3: If polyester is baked onto the ceramic sole, wipe it off with a soft cloth dipped in rubbing alcohol. Then clean off any remaining rubbing alcohol with a soft, damp cloth and dry thoroughly.

STEP 4: To remove deposits around the steam holes, use a cotton swab moistened with rubbing alcohol. Then wipe off the rubbing alcohol with a soft, damp cloth and dry thoroughly.

Parts description

1. Base plate
2. Main body
3. Upper body
4. Locking button
5. Release button
6. Ironing platform

7. Iron soleplate
8. LED light
9. Steam trigger
10. Temperature controller
11. Steam hose
12. Plug

Preparation for use

Water type for use

This appliance was designed for use with tap water. However, if you live in an area with hard water, limescale buildup may occur quickly. Therefore, it is recommended to use distilled or demineralized water to extend the appliance's lifespan.

Warning:

Do not use perfumed water, water from the tumble dryer, vinegar, starch, descaling agents, ironing aids, chemically softened water or other chemicals, as these may cause water splashes, brown stains or damage to the appliance.

	Filling the water tank 1. Fill the water tank before use if the water level has dropped below the minimum. You can refill the water tank at any time during use.
	2. Remove the water tank from the base. 3. Fill the water tank to the MAX mark.
	4. Reinsert the water tank into the appliance by first inserting the lower part of the tank into the appliance. 5. Push the upper part of the water tank in until it clicks into place.
	Iron 1. Place the steam generator on a stable and level surface. Note: To ensure safe ironing, we recommend always placing the base on a stable ironing board. 2. Make sure there is enough water in the water tank. 3. Plug in the power cord and switch on the iron at the power supply.
	4. To increase the temperature of the iron, turn the temperature control clockwise until the desired temperature setting is reached. To decrease the temperature, turn the control knob counterclockwise. 5. Press the on/off button to turn on the steam generator. The indicator light will illuminate to show that the iron is heating up; the iron light will flicker while it is heating up. is heated up.
	This takes about 1 minute. The iron only produces steam when the temperature control is set to the 3-point heat setting or higher. 6. Remove the inlet hose from the hose storage compartment. 7. Press the carrying lock button to unlock the iron from the ironing platform.
	8. Press and hold the steam trigger to begin ironing. Warning: Never direct steam at people! 9. For best ironing results: After steam ironing, perform the last few strokes without steam.
	A notice: When you use the device for the first time, it may take up to 45 seconds for steam to come out of the device. A notice: The pump is activated every time you Press the steam release button. This will create a slight puff of steam. A rattling noise, which is normal. The pump noise will be louder if there is no water in the tank. Refill the water tank when the water level drops below the minimum.
	Save energy ECO mode By using ECO mode (reduced (Steam quantity) you can save energy without compromising on the ironing result. 1. To activate ECO mode, press the ECO button. The green ECO light will illuminate. 2. To deactivate ECO mode, press Press the ECO button again. The green ECO light goes out. Automatic safety shutdown mode (only) (certain models) To save energy, the device switches off automatically if it has not been used for 10 minutes. The auto-off indicator light in the on/off switch starts flashing. To reactivate the device, press the Press the on/off button, and the device will start heating again. Warning: Never leave the device unattended when it is connected to the power grid. Pull Always unplug the device after use.
	Smart Calc-Clean System Your device has been equipped with a Smart Calc-Clean system. Designed to ensure regular descaling and cleaning. This helps to maintain strong steam performance and prevents dirt and stains from seeping out of the soleplate over time. Press and hold the CALC-CLEAN button for 2 seconds until you hear short beeps.
	Cleaning the iron sole To properly maintain your device, clean it regularly. 1. Clean the device with a damp cloth. 2. To remove stains easily and effectively, let the soleplate heat up and move the iron over a damp cloth. Tip: Clean the soleplate regularly to ensure smooth gliding.
	storage 1. Switch off the steam generator and unplug. You unplug it. 2. Pour the water from the water tank into the sink. 3. Fold the inlet hose and wrap it in the hose storage compartment. Secure it in the storage hook. 4. Fold the power cord and secure it with the Velcro fastener. 5. Press the carrying lock button to lock the iron onto the ironing platform.